"...the best off-the-shelf compensator on the market today..."
-Beven Grams, Grams Engineering
Machined (not cast) from 416-series stainless steel, coated in tough black oxide, the F2 compensator measures 1.00" by 3.00" (the largest dimensions possible under USPSA Limited and Tactical rules). Threaded 1/2"-28, the F2 tapers to .750 for a smooth transition to the barrel. This is, according to no less than Bevin Grams, Grams Engineering, "...the best off-the-shelf compensator on the market today...". In use around the world by competition shooters, police, and military, this compensator was designed by an expert in fluid dynamics to reduce or eliminate muzzle rise AND torquing, allowing fast splits on paper at full auto speeds!
Here are some "side-by-side" comparisons. From left to right: F2, Triangle Shooting Sports, JP "Cooley", Miculek, JP "Open".
Notice the huge triple side ports, asymmetric baffles and dynamically arranged top ports on the F2.
STATUS: In stock for immediate shipment: $99.95
Please email for payment options: Paypal is "staffed" by a bunch of California wimps who pee in their little boy pants over the mere thought of gun PARTS, much less an acually (gasp) GUN so we have switched to alternate means. BOYCOTT PAYPAL!
FITTING: Installation with cut to length, thread and recrown: $49.95 (other barrel work available; email for details)
A recoil compensator...for your shotgun! Another innovative design from Fred Hindman, this comp works by cutting perceived recoil and smoothing the recoil pulse for faster on-target splits. Machined from billet aluminum and hard anodized, this six-ounce two-chamber design forces gas forward and around optimally placed baffles. Featuring an integral 1913-specification rail that can be mounted to the top or bottom of a smooth barrel for either sights or accessories, the FH also has pre-located points to allow easy drill-and-tap direct mounting of a slide ride C-More sight. The FH can be made to fit over a vent rib such as those found on many Remington 1100 series shotguns. Gunsmith installation recommended, as proper fitting requires holes drilled in the sides of your shotgun barrel. Size: 3 by 3 by 1 3/8 inches.
COST: $199.95
Please email for payment options: Paypal is "staffed" by a bunch of California wimps who pee in their little boy pants over the mere thought of gun PARTS, much less an acually (gasp) GUN so we have switched to alternate means. BOYCOTT PAYPAL!
FITTING: Installation $99.95 on smooth barrels, including offset barrel porting if desired FITTING: Installation $124.95 on vent rib barrels, including offset barrel porting if desired
Our AR-15 pattern 9mm conversion system includes everything you need to run standard 9mm ammunition using your complete AR lower! This kit includes the flat top upper (with conventional 2-piece handguard and A-frame front sight or aluminum free-float handguard), complete with bolt assembly, charging handle, and mag block adaptor. No need to replace your hammer or buffer...we build our kits right the first time!
$645 as shown
Here is one of our kits installed on a DI-15 lower with M-4 pattern hardware:
When plastic just won't do!
Machined, not cast, from billet aluminum...these AR-15 type butt plates are available as 3/4" spacers (recessed to use standard bolts) or as regular 1/4" plates. They can be special ordered with "tactical" vertical lines, eagle logo, checkered, checkered with your name...contact us for details! Don't bother with easily-broken plastic spacers, aluminum is blacksmith tough and ready to go the distance.
STATUS: 3/4" checkered pattern in stock for immediate delivery: $24.95
Special order available on request, $34.95
For use when building up custom guns, this 1911 Frame Spacer fills that ugly gap between the hammer and the mainspring housing on your 1911 with a stainless steel beavertail spacer. No other function than filling space! Crafted of stainless steel in the much-admired STI pattern, these retail for $39.95. Contact us for more information!
For information or ordering, email: ORDERS